Olanzapine (OZP) Rapid Test kit (Urine)with CE Certificate

Description:

Olanzapine is an atypical antipsychotic drug which antagonizes several neutrotransmitter receptors including dopamine and 5-HT receptorsIt is a thienobenzodiazepine classified as an atypical or second-generation antipsychotic agent
and approved to be marketed in the US in 1996.However, there are known pharmacological actions, extrapyramidal and anticholinergic effects when drug in overdose, including somnolence, mydriasis, blurred vision, respiratory depression, and hypotension. Olanzapine is mainly eliminated through metabolism and hence, only 7% of the eliminated drug can be found as the unchanged form. It is mainly excreted in the urine which represents around 53% of the excreted dose followed by the feces that represent about 30%.The Olanzapine Rapid Test Cassette (Urine) is a rapid urine screening test that can be performed without the use of an instrument. The test utilizes a monoclonal antibody to selectively detect elevated levels of Olanzapine in urine. The Olanzapine Rapid Test Cassette (Urine) yields a positive result when Olanzapine in urine exceeds 1000ng/ml.

DIRECTIONS FOR CASSETTE USE:
Allow the test, urine specimen, and/or controls to reach room temperature (15-30ºC) prior to testing.
1. Bring the pouch to room temperature before opening it. Remove the test cassette from the sealed pouch and use it within one hour.
2. Place the test cassette on a clean and level surface. Hold the dropper vertically and transfer 3 full drops of urine (approx. 120 L) to the specimen well (S) of the test cassette, and then start the timer. Avoid trapping air bubbles in the specimen well (S). See the illustration below.
3. Wait for the colored line(s) to appear. Read results at 5 minutes. Do not interpret the result after 10 minutes.

【DIRECTIONS FOR PANEL USE】
Allow the test, urine specimen, and/or controls to reach room temperature (15-30C) prior to
testing.
1. Bring the pouch to room temperature before opening it. Remove the test panel from the sealed pouch and use it within one hour.
2. Remove the cap.
3. With the arrow pointing toward the urine specimen, immerse the test panel vertically in the urine specimen for at least 10 to 15 seconds. Immerse the strip to at least the level of the wavy lines, but not above the arrow on the test panel.
4. Replace the cap and place the test panel on a non-absorbent flat surface.
5. Start the timer and wait for the colored line(s) to appear.
6. The result should be read at 5 minutes. Do not interpret the result after 10 minutes.

【DIRECTIONS FOR DIPSTICK USE】
Allow the test, urine specimen, and/or controls to reach room temperature (15-30C) prior to
testing.
1. Bring the pouch or canister to room temperature before opening it. Remove the Test Dipstick from the sealed pouch or closed canister and use it within one hour.
2. With arrows pointing toward the urine specimen, immerse the Test Dipstick vertically in the urine specimen for at least 10-15 seconds. Do not pass the maximum line (MAX) on the Test Dipstick when immersing the strip. See the illustration below.
3. Place the Test Dipstick on a non-absorbent flat surface, start the timer and wait for the colored line(s) to appear. Read results at 5 minutes. Do not interpret the result after 10 minutes.