Send Message

300ng / Ml Panel Propoxyphene PPX One Step Rapid Test Powder Drug Abuse Testing

Basic Information
Place of Origin: China
Brand Name: AllTest
Certification: CE, ISO13485
Model Number: DPP-X14
Minimum Order Quantity: N/A
Price: Negotiation
Packaging Details: 25 cassette/box
Delivery Time: 2-4 Weeks
Payment Terms: Ex works
Supply Ability: 10 M tests/month
Format: Panel Specimen: Powder
Kit Size: 25T/Kit Storage: 2-30℃
Cut-off: 50 Ng/ml Certificate: CE
High Light:

one step rapid test

,

home drug test kits

 

300ng/ml Panel High quality Propoxyphene (PPX) Powder Drug Abuse Test Kit Wiht CE

 

 

Applications: 

 

The Propoxyphene Rapid Test Panel is a rapid chromatographic immunoassay for the qualitative detection of Propoxyphene t a cut-off 300ng/ml.This assay provides only a preliminary analytical test result. A more specific alternate chemical method must be used in order to obtain a confirmed analytical result. Gas chromatography/mass spectrometry (GC/MS) is the preferred confirmatory method. Clinical
consideration and professional judgment should be applied to any drug of abuse test result, particularly when preliminary positive results are indicated.

 

 

Description:

 

Propoxyphene (PPX) is a narcotic analgesic compound bearing structural similarity to methadone. As an analgesic, propoxyphene can be from 50-75% as potent as oral codeine. Darvocet™, one of the most common brand names for the drug, contains 50-100 mg of propoxyphene napsylate and 325-650 mg of acetaminophen. Peakplasma concentrations of propoxyphene are achieved from 1 to 2 hours post dose. In the case of overdose, propoxyphene blood concentrations can reach significantly higher levels.
In humans, propoxyphene is metabolized by N-demethylation to yield norpropoxyphene. Norpropoxyphene has a longer half-life (30 to 36 hours) than parent propoxyphene (6 to 12 hours).The accumulation of norpropoxyphene seen with repeated doses may be largely responsible for resultant toxicity.
The Propoxyphene contained within the PPX Rapid Test Panel yields a positive result when the PPX concentration exceeds 300ng/ml.

 

How to use?

 

Test device (in closed pouches), samples, and controls should be brought to room temperature (15-30°C) prior to testing. Do not open pouches until ready to perform the assay.
Remove the test device from its protective pouch and label the device with patient’s identification or control label.
FOR SURFACES
1. Wipe with the panel over the surface in which the drugs are expected.
2. Take off the cap of supplied tube;
3. Fill all buffers from the supplied tube of buffer into the protection cover.
4. Insert the Multi Test slowly and carefully into the protection cover with buffer
5. Wait for lines to appear on the membrane and read the results after 5 minutes and do not interpret the result after 10 minutes.

300ng / Ml Panel Propoxyphene PPX One Step Rapid Test Powder Drug Abuse Testing 0

 
FOR SOLIDS
1. Open the tube and put the solid in to the buffer.
2. Close the tube with dropper and cap. Shake it a short time. Wait for 30 sec.
3. Take off the cap of supplied tube;
4. Fill all buffers with dissolved substances into the protection cover.
5. Insert the Multi Test slowly and carefully into the protection cover with buffer.
6. Wait for lines to appear on the membrane and read the results after 5 minutes and do not interpret the result after 10 minutes.

300ng / Ml Panel Propoxyphene PPX One Step Rapid Test Powder Drug Abuse Testing 1


 

INTERPRETATION OF RESULTS
(Please refer to the illustration above)
300ng / Ml Panel Propoxyphene PPX One Step Rapid Test Powder Drug Abuse Testing 2

NEGATIVE:* A colored line appears in the Control region (C) and colored lines appear in the Test region (T). This negative result means that the concentrations in the sample are below the designated cut-off levels for a particular drug tested.


*NOTE: The shade of the colored lines(s) in the Test region (T) may vary. The result should be considered negative whenever there is even a faint line.

300ng / Ml Panel Propoxyphene PPX One Step Rapid Test Powder Drug Abuse Testing 3

POSITIVE: A colored line appears in the Control region (C) and NO line appears in the Test region (T). The positive result means that the drug concentration in the sample is greater than the designated cut-off for a specific drug.


300ng / Ml Panel Propoxyphene PPX One Step Rapid Test Powder Drug Abuse Testing 4

 

INVALID: No line appears in the Control region (C). Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for Control line failure. Read the directions again and repeat the test with a new test card. If the result is still invalid, contact your manufacturer.

Contact Details
selina

Phone Number : +8615857153722

WhatsApp : +8613989889852